{"product_id":"perforated-reflective-piping","title":"パンチング反射フィルム縁取り","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eEdging made from perforated reflective heat transfer film bonded to a coloured tricot. Holes are punched through the film before bonding, so the openings stay clean and the trim still passes air.\u003c\/p\u003e\n\u003cp\u003eThe process order is the specification. Punching after bonding tears the adhesive line around each hole and leaves a raised burr that catches on the needle; punching first means the film is cut while it is still flat and supported, and the bond is then made around holes that are already clean.\u003c\/p\u003e\n\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode:\u003c\/strong\u003e RS-F-SP-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaytime colour:\u003c\/strong\u003e Customized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking:\u003c\/strong\u003e Colourable tricot fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflective material:\u003c\/strong\u003e Perforated reflective heat transfer film\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflectivity:\u003c\/strong\u003e up to 330 cd\/(lx·m²)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.3 cm to 3 cm (customizable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat the holes cost you in reflective area\u003c\/h2\u003e\n\u003cp\u003eEvery hole is a hole in the reflective surface, so a perforated edging always has less reflective area than a solid band of the same width. The trade is real and predictable: more open area means better airflow through the seam and a lower effective reflective coverage. On a narrow piping the percentage matters more than it does on a wide panel, because there is less width to absorb the loss — agree the hole diameter and spacing against the requirement rather than choosing the most breathable option.\u003c\/p\u003e\n\n\u003ch2\u003eTypical use\u003c\/h2\u003e\n\u003cp\u003eBreathable outerwear, sportswear and vests where a solid reflective band would make the seam the hottest part of the garment.\u003c\/p\u003e\n\u003cp\u003eIt is also used on footwear and luggage trim, where air movement matters less than keeping the edging soft and light along a curve.\u003c\/p\u003e\n\n\u003ch2\u003eWhat to confirm before ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter and spacing:\u003c\/strong\u003e sets both airflow and reflective loss — agree against the requirement, not by feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective reflective area:\u003c\/strong\u003e below the nominal width because of the perforation; confirm it still meets the design intent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasured reflectivity:\u003c\/strong\u003e up to 330 is the floor — confirm the tested figure on your build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking colour:\u003c\/strong\u003e visible through the holes, so supply the garment colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash cycle:\u003c\/strong\u003e domestic or industrial.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompliance note\u003c\/h2\u003e\n\u003cp\u003eThe stated figure is up to 330 cd\/(lx·m²) — at the EN ISO 20471 floor rather than above it. That makes the build a per-order question rather than a general claim: the construction and the tested sample have to agree before a garment is put forward for certification.\u003c\/p\u003e\n\u003cp\u003eThe standard certifies the finished garment, not the trim. Confirm the measured value on the actual build and the area and placement of the reflective elements before committing the programme.\u003c\/p\u003e\n\n\u003ch2\u003eRelated formats\u003c\/h2\u003e\n\u003cp\u003eFor a segmented (not perforated) piping, see \u003ca href=\"\/ja\/products\/segmented-reflective-piping-tape\"\u003eSegmented Reflective Piping Tape\u003c\/a\u003e; for perforated fabric rather than edging, \u003ca href=\"\/ja\/products\/perforated-reflective-fabric\"\u003ePerforated Reflective Fabric\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eSamples and lead time\u003c\/h2\u003e\n\u003cp\u003eA4 swatches are free so your team can check colour, flex and hand feel under your own lighting before committing. Standard lead time is 2–4 weeks from order confirmation.\u003c\/p\u003e","brand":"Reflexstrip","offers":[{"title":"RS-F-SP-06","offer_id":67745986773179,"sku":"RS-F-SP-06","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/2849\/0427\/files\/pp-05-perforated.png?v=1792392183","url":"https:\/\/reflexstrip.com\/ja\/products\/perforated-reflective-piping","provider":"Reflexstrip","version":"1.0","type":"link"}