Overview
A navy boilersuit with the fluorescent placed as a yoke across the chest and shoulders rather than as a full fluorescent body. The result reads as a conventional overall at a distance and as a high-visibility garment where it counts, which is often what a maintenance or plant role actually wants.
Construction
- Navy one-piece overall with a fluorescent yellow-green chest and shoulder yoke
- Reflective band around the chest and around each ankle
- Two-way front zip
- Two breast pockets, elasticated back waist
Two-way zip matters on a one-piece
A single-direction zip means the whole garment has to come off for a visit to the toilet. A two-way zip lets the lower half open independently, which is the difference between a boilersuit that gets worn and one that gets left in the locker. It is a small spec detail with a large effect on whether the garment is actually used.
Typical use
Maintenance, plant and workshop roles, cleaning and facilities, and any site where a full fluorescent body would be more than the role requires.
A yoke rather than a full fluorescent body, by design
This is not a cheaper version of the coverall, it is a different brief: a conventional navy overall with the visible part placed as a chest and shoulder yoke, for roles where a fully fluorescent body reads as excessive. The consequence should be said plainly rather than left to be discovered: less fluorescent area means a lower class, or no class at all. If the site specifies a class, this garment is the wrong one however good it looks.
What to confirm before ordering
- Class or type you are buying to: EN ISO 20471 class 1, 2 or 3, or an ANSI/ISEA 107 type. The same garment cannot be every class, so the class has to be stated before the banding is fixed.
- The layer it goes over: Class areas are measured on the garment, not on the outfit. A jacket worn over a fleece has to fit over the fleece, which may mean a larger size rather than less banding.
- Whether waterproofing or flame retardancy is also required: Those are separate standards with separate tests. A high-visibility claim says nothing about either.
- Band width and layout, if your buyer's spec fixes them: Two suppliers can both meet a class with different layouts, so a fixed layout is a spec item and not a detail.
- Whether trims, logos and pockets may reduce the fluorescent area: Some specs prohibit it. Pockets and logos are subtracted from the area that counts.
Compliance note
A high-visibility garment is assessed as a garment, not as a fabric. Band width, band count, fluorescent area and the way they are laid out are all measured on the finished article, and the class belongs to that article. What can be stated here is the standard the build is designed against and how the banding is arranged; what cannot be stated on a product page is that a particular batch's certificate matches your requirement. That certificate is requested per order, against the standard and class in your purchase spec, and it is the document your customer's auditor will ask for.
Related formats
For closely related builds see Hi Vis Work Coverall and Hi Vis Flame-Retardant Coverall. The full category is at Safety Coveralls.
Samples and lead time
Sample pieces are supplied before a bulk order so your team can check fit, finish and marking on the actual article. Standard lead time is 2–4 weeks from order confirmation.
