Overview
A photoluminescent reflective tape that keeps PPE garments and workwear visible after the light source is gone. The tape charges under normal daylight or site lighting, then emits a clear yellow-green glow in complete darkness, so a garment that is already high-visibility in headlights stays identifiable when power fails, lights are switched off, or a night operation moves away from any lamp.
Key features
- Photoluminescent face charges from ambient light and glows without any power source
- Retroreflective structure keeps the tape bright under headlights and torches
- Sew-on construction for stable attachment on woven workwear and protective garments
- Widths from 1 cm to 140 cm to cover trims, bands and large panels
- Flexible cloth hand that follows garment contours without stiffening seams
Specifications
| Construction | Photoluminescent reflective tape, sew-on |
| Glow colour | Yellow-green |
| Charge time | About 10-30 minutes under direct sunlight or bright artificial light |
| Glow duration | Most vibrant for the first 1-2 hours, then fades gradually over several hours |
| Width range | 1 cm - 140 cm |
| Applications | Workwear, outdoor gear, safety apparel |
Applications
- High-visibility workwear and PPE garments
- Outdoor and emergency equipment
- Night-time maintenance and road crews
Common questions
How long does the tape glow?
Glow is most vibrant for the first 1-2 hours after charging and then fades gradually over several hours. Actual duration depends on light intensity and charging time.
How long does it need to charge?
About 10-30 minutes of direct sunlight or bright artificial light is normally enough for a noticeable glow.
Can it be sewn onto garments?
Yes. This construction is sew-on, which is the standard attachment for woven workwear and protective clothing.
Not sure which luminous construction fits your garment? Send us the application, target width and care requirements, and we will recommend the matching build.
Tape format limits the luminous area
A narrow luminous tape glows in a thin line, so the visible effect after dark is proportional to width. If the requirement is to be seen, confirm the width needed rather than the tape grade.
What to confirm before ordering
- Charging exposure: how much light the panel sees before use decides the afterglow.
- Afterglow requirement: duration and brightness are confirmed per build - give a target.
- Carrier or backing: glow is delivered on different carriers; confirm which suits your process.
- Wash cycle: luminous layers dim with washing, so state domestic or industrial.
Compliance note
No single retroreflective figure is quoted for this build, and a number without its test method and wash cycle would not be comparable anyway. Confirm the measured value for the grade you order, on the substrate you order it on.
If the finished article has to carry an EN ISO 20471 or ANSI/ISEA 107 claim, say so before the order: the grade and the evidence are chosen together, and changing either afterwards means a new build.
Related formats
Related builds: Glow-in-the-Dark Fabric (Full Luminous), Segmented Luminous Reflective Tape. Overview at Glow In The Dark Fabric.
Samples and lead time
A4 swatches are free so your team can check colour and hand feel before committing. Standard lead time is 2–4 weeks from order confirmation.
